David, I had the same issues with keeping tig fingers on while moving around. The fix for me was to use some Velcro straps and sew them on to the glove and tig finger. I also found that I needed to sew the internal portion of the tig finger at the top to keep it from pulling apart. I have some pictures of what worked for me but haven't been able to add them to this post. I basically placed the Velcro straps, male/female, where I thought I needed them on the glove and tig finger. Then I sewed them in place. I used some thin nylon thread with a large needle. It is not easy to sew but it can be done. My sewing looks terrible, but it did the trick. Hope this helps.