Live stream preview
Matt Hayden - 2G Pulse Plate Test Part 2
Instructor: Matt Hayden • 5m 47s
2G Pulse Plate Test Part 2. 3/8" Inch plate 1/4" inch gap and backing. ER70s6 wire. 230 ipm wire speed. Pulse Spray MIG trim set to 1.05. Lincoln S350 pulse spray program #12.
Up Next in Instructor: Matt Hayden
-
Matt Hayden - Pulse Spray MIG 2F Tee ...
In this video Matt welds a 2f tee joint fillet weld using pulse spray mig using .035" ER70S6 wire at 425 ipm
-
Matt Hayden 2F Spray with 90-10 Gas
Horizontal 2F position on a tee joint
-
Matt Hayden - 1G Spray Arc with 90-10...
1G Test Plate with Spray Arc...A common test for some of the local industry close to me
90/10 argon/co2 is a fairly commonly used blend for spray transfer mig and also works for pulse spray.
For this 1G test plate we used .035" ER70S6 wire
Settings were dialed in using a simple 2f tee joint in o...
