Part 8 - The One Technique to Rule Them All (MIG Basics with Jody Collier)
Jody Collier - Intro to MIG Welding • 7m 17s
If you're just looking to keep things simple, this one MIG technique works for all positions.
By tracing the front leading edge of the puddle, this one single MIG welding technique gets penetration in every position.
Up Next in Jody Collier - Intro to MIG Welding
-
Part 9 - Short Arc MIG, Push vs Pull ...
Using a push angle vs a pull angle is an argument that shouldn't even exist, but folks continue to argue. Both work.
For spray transfer MIG, pushing is usually best. But for short circuit MIG, both pushing and pulling have their place... and that's a good thing because sometimes you don't have ...
-
Part 10 - "MIG Like TIG" vs Hot (MIG ...
In some industries, a certain look is expected for MIG welds. For example, the motorsports industries has adopted the "MIG like TIG" look.
It involves using settings different from what is normally used for production. Wire speed in particular is usually much lower, which lowers the overall trav...
-
Part 11 - MIG Welding 3F Uphill Tee (...
MIG welding uphill requires lower settings. A pro tip is to just use the chart or auto settings for thinner metal ( 2 thicknesses usually works well).
