Live stream preview

Watch this video and more on WelderSkills

Watch this video and more on WelderSkills

One Simple MIG Welding Technique That works for All Positions

MIG > Certification Tests • 6m 40s

Up Next in MIG > Certification Tests

  • Mig Welding Outside Corner uphill

    Mig Welding outside corner joints and testing them using the cut and etch test.
    C25 gas was used along with .035 (.9mm) ER70s-6 wire.
    Thermal Arc fabricator 252i welder (very finicky) was used.
    Uphill single pass weld tested against 2 pass weld with downhill root pass.
    mig welding settings and te...