Live stream preview

Watch this video and more on WelderSkills

Watch this video and more on WelderSkills

Part 4 - Run Those Beads (MIG Basics with Jody Collier)

MIG > For Beginners • 7m 59s

Up Next in MIG > For Beginners

  • Part 5 - Tee Joints (MIG Basics with ...

    One of the best ways to get a lot of practice with a small amount of metal is stacking beads on a tee joint.

    Remember, "practice makes better" (because perfection doesn't exist).

  • Part 6 - MIG Vertical Uphill (MIG Bas...

    One of the most important concepts in welding is POSITION. Let's talk MIG welding, vertical uphill.

    Mig welding vertical uphill requires using some manipulation to prevent the weld from being too convex. Proper settings (lower settings than what are normally used for flat and horizontal) techni...

  • Part 7 - Overhead MIG (MIG Basics wit...

    Mig welding overhead is mostly a matter of getting comfortable. Again, POSITION.

    The same settings and techniques that are used for flat and horizontal also work on overhead. But if you typically weld really hot, reducing the wire speed by 10% might help.