Live stream preview

Watch this video and more on WelderSkills

Watch this video and more on WelderSkills

Part 10 - "MIG Like TIG" vs Hot (MIG Basics with Jody Collier)

MIG > For Beginners • 6m 1s

Up Next in MIG > For Beginners

  • Part 12 - MIG Welding Thin Wall Squar...

    MIG welding thin wall square tubing in a common fixed position.

  • Part 11 - MIG Welding 3F Uphill Tee (...

    MIG welding uphill requires lower settings. A pro tip is to just use the chart or auto settings for thinner metal ( 2 thicknesses usually works well).

  • Part 9 - Short Arc MIG, Push vs Pull ...

    Using a push angle vs a pull angle is an argument that shouldn't even exist, but folks continue to argue. Both work.

    For spray transfer MIG, pushing is usually best. But for short circuit MIG, both pushing and pulling have their place... and that's a good thing because sometimes you don't have ...