Brother Moto Coffee Bar build with JD and Jimmy Diresta
More Videos • 7m 20s
Laser levels, cutting with a 6" Metabo, Tips for Mig welding off a 115 volt drop cord and a few fabrication techniques are shown during this project
Up Next in More Videos
-
Building a Slide Hammer Tool for Spat...
Super quick project but very useful is this slide hammer tool that uses a chisel and slide hammer for removing weld spatter
-
Learning How to Walk the Cup
A very good TIG welding technique for pipe and a few other round shapes is walking the cup.
But its good to be also be able to freehand.
Sometimes there are obstacles that prevent walking the cup. For those occasions being able to prop with a tig finger can help.
Other times, a part has smooth m... -
Tungsten Angle Grind Makes a Difference
There are several charts in text books and on web sites that depict the penetration profile caused by different grind angles of tungsten electrodes.
I like to see things for myself so I tested 3 very different angles on pieces of 2% lanthanated electrodes ...all 3/32" (2.4mm).
I let the piece co...
