Live stream preview

Watch this video and more on WelderSkills

Watch this video and more on WelderSkills

Dual Shield Flux Core vs 7018 Uphill

More Videos • 10m

Up Next in More Videos

  • Welding Thick 4130 Preheat and Laywir...

    Welding thick 4130 parts requires a preheat in order to prevent hard brittle areas. ER70 filler wire was used.

  • TIG Welding Aluminum Techniques for B...

    The basic settings are 100-140 amps using foot pedal so basically what that mean is at times I am at 140 amps but also much lower when heat soaks the small practice piece.
    i used nearly 140 amps but when the aluminum gets soaked with heat, I used the foot pedal to use less amperage.
    AC balance ...

  • Walking the Cup Tips and Techniques

    If you have ever walked a 55 gallon drum across a shop floor, you understand how it works.

    In this video I found some scrap pieces of 303 free machining stainless and chucked then up in a turntable and made a multipass weld walking the cup.

    For a total of 7 passes.

    I brought you along for t...