JD Brewer - Fabricating a 60ft Rack, Dual Shield Flux Core (Part 1)
More Videos • 15m
JD Brewer took on a project of building a 60 ft long rack that goes in a factory that works with long metal rods. He built a 40 ft section first. That will be cut in half with bolted flange connections welded on to facilitate transport and installation.
Dual shield flux core welding using a Lincoln Electric powermig 256 and .035" 71m wire.
Up Next in More Videos
-
JD Brewer - Firepit Build with Plasma...
1/4" thick tread plate that JD scored on a job site that was heading for the scrap yard. So he decided to build a fire pit for his helper Wyatt.
1/4" tread might be considered overkill for a fire pit but "there is no kill like overkill." Made for a fun day in the shop.
-
Cut and Etch Testing Short Circuit MI...
Cutting and Etching is a destructive test so can not be used on live parts but it provides valuable information on your mig welding technique and settings.
Cut with a zip disc, bandsaw, portaband, or whatever and then just smooth with a flap disc and some scotch brite pads.
I used a passivation s... -
Angle Grinders
I like to keep different grinding wheels on each one and that way I hardly every have to change wheels.
