JD Brewer - Firepit Build with PlasmaCam
More Videos • 13m
1/4" thick tread plate that JD scored on a job site that was heading for the scrap yard. So he decided to build a fire pit for his helper Wyatt.
1/4" tread might be considered overkill for a fire pit but "there is no kill like overkill." Made for a fun day in the shop.
Up Next in More Videos
Cut and Etch Testing Short Circuit MI...
Cutting and Etching is a destructive test so can not be used on live parts but it provides valuable information on your mig welding technique and settings.
Cut with a zip disc, bandsaw, portaband, or whatever and then just smooth with a flap disc and some scotch brite pads.
I used a passivation s...
I like to keep different grinding wheels on each one and that way I hardly every have to change wheels.
Brother Moto Coffee Bar build with JD...
Laser levels, cutting with a 6" Metabo, Tips for Mig welding off a 115 volt drop cord and a few fabrication techniques are shown during this project