Live stream preview

Watch this video and more on WelderSkills

Watch this video and more on WelderSkills

MIG Techniques Tested with Cut and Etch Macro

More Videos • 6m 20s

Up Next in More Videos

  • TIG Welding Steel Cube Project

    TIG welding cold rolled steel 3"x3" x1/4" using er309L and E70s-6 filler metal.
    12 outside joints provides plenty of welds to experiment using different size filler metals and pulse settings too.
    There is also a second video of filling in the corners using silicon bronze.

  • Stick Welding 3G Weld Test - 5/32" 7018

    Controlling the puddle, getting adequate penetration, avoiding undercut, preventing arc blow, and complying with AWS D1.1 acceptance criteria are all important.
    Some welders are being required to test using 5/32" 7018 electrodes instead of smaller diameter electrodes like 1/8". 130 amps is at the...

  • MIG Welding Downhill Open Roots and Gaps

    Lots of Discussion happens when you talk about mig welding downhill. Personally, I prefer to go uphill on anything 3/16" and thicker. But for open butt root passes in pipe welding in fab shops, downhill mig is pretty common and yields good results provided the bevel, gap, fitup, and land are with...