Live stream preview

Watch this video and more on WelderSkills

Watch this video and more on WelderSkills

MIG Welding Downhill Open Roots and Gaps

More Videos • 8m 16s

Up Next in More Videos

  • JD Brewer - MIG Welding Downhill Root...

    JD and Jody experiment with a used welding positioner bought off ebay.

    JD had just finished up a handrail project and had a few fittings and some pipe left over. They tried some 6" schedule 80 as well as some 1-1/2" sched 40 pipe on the positioner.

    Always learning...

  • Mig Welding Outside Corner uphill

    Mig Welding outside corner joints and testing them using the cut and etch test.
    C25 gas was used along with .035 (.9mm) ER70s-6 wire.
    Thermal Arc fabricator 252i welder (very finicky) was used.
    Uphill single pass weld tested against 2 pass weld with downhill root pass.
    mig welding settings and te...

  • TIG Brazing a Cast Iron Vise

    I have had really good results tig welding cast iron using AC and Aluminum bronze filler rod. ( thats ErCu-Al-A2)
    But only on cast iron that does not operate at high temperatures like exhaust manifolds.
    On those type jobs, there are better filler metals that more closely match the expansion an...