JD ordered a cart for his shop that included bottom drawer and foot pedal holder. In this video, we use a torch switch at high amperage for tack welding, then we compare straight welding current to pulse TIG.
And.... we experimented with pulse settings using silicon bronze rod and lay wire technique. It worked great.
JD Brewer took on a project of building a 60 ft long rack that goes in a factory that works with long metal rods. He built a 40 ft section first. That will be cut in half with bolted flange connections welded on to facilitate transport and installation.
Dual shield flux core welding using a Lin...
1/4" thick tread plate that JD scored on a job site that was heading for the scrap yard. So he decided to build a fire pit for his helper Wyatt.
1/4" tread might be considered overkill for a fire pit but "there is no kill like overkill." Made for a fun day in the shop.
Cutting and Etching is a destructive test so can not be used on live parts but it provides valuable information on your mig welding technique and settings.
Cut with a zip disc, bandsaw, portaband, or whatever and then just smooth with a flap disc and some scotch brite pads.
I used a passivation s...