Live stream preview

Watch this video and more on WelderSkills

Watch this video and more on WelderSkills

Stick Welding Aluminum

More Videos • 2m 43s

Up Next in More Videos

  • AC Frequency Settings for TIG Welding...

    This video is about tig welding aluminum on AC at 50hz and at 250hz.
    there was a noticeable difference at the 2 different settings. 50hz got completed penetration and 250hz did not penetrate.
    I tried to keep travel speed the same for both welds by using a motorized welding positioner turntable.
    C...

  • AC frequency settings for TIG WELDING...

    This is part 3 in a "how to tig weld aluminum" series. this video is about AC frequency adjustments and when to use different frequency settings.
    Rule of thumb here is higher frequencies seem to help on thinner aluminum and lower frequencies help on thicker aluminum...especially for tig welding...

  • Andrew Cardin - 4F Overhead 7018 5/32...

    Andrew Cardin did the welding in this video while Jody handled the filming.

    165 amps, arc force set to 10 using a Lincoln PowerMIG 210mp. We decided to use some leftover rods so that we show lots of restarts because being able to make a good restart is a fundamental skill... especially in overhe...