TIG Welding Box Cutter Blades
More Videos • 3m 30s
TIg welding box cutter blades can be very good practice because it makes you get used to focusing your eyes on a very small puddle, you have to get used to using a very small filler wire, and you also see how beneficial it is to use aluminum backing on thin metal.
Up Next in More Videos
-
Rocket Stove project
After watching at least 20 videos on making Rocket Stoves, I decided to try my own design. I scrounged up enough scrap materials laying around the shop to make one that works really well. I used A 10 inch piece of 3" stainless tubing
and a short piece of 1-1/4" sq tubing about 5 inches long w... -
MIG Techniques PUSH AND PULL Tested w...
A good way to test for penetration is the cut and etch test.
If the test is done while the weld is still fresh on you mind, there is a lot that can be learned and welding technique can be adjusted and improved.I used a lincoln electric power mig 210mp for the first welds with settings of 19 vol...
-
TIG Welding Steel Cube Project
TIG welding cold rolled steel 3"x3" x1/4" using er309L and E70s-6 filler metal.
12 outside joints provides plenty of welds to experiment using different size filler metals and pulse settings too.
There is also a second video of filling in the corners using silicon bronze.
