Stick Welding 2g 3/8" plate with 7018 1/8"
Intro to Stick Welding (SMAW) • 9m 37s
Stick Welding 2g 3/8" plate with 7018 1/8"
3/8" thick plate with 22.5 deg bevels
1/4" backing bar, 1/4" gap
7018 1/8" dcep 130-135 amps root
slightly less amperage for cap
Up Next in Intro to Stick Welding (SMAW)
-
Stick Welding 3G 7018 Plate Test 3/8"...
This video covers Welding a 3G Plate Test 3/8" thick with 1/4" Backing and 1/4" gap using 7018 1/8" at 120 amps
Toward the end of the video, you will see instructions for padding beads vertical uphill using 7018 1/8"
If you have having trouble getting uniform beads on a 3g test, padding beads is ... -
Stick Welding 3G Weld Test - 5/32" 7018
Controlling the puddle, getting adequate penetration, avoiding undercut, preventing arc blow, and complying with AWS D1.1 acceptance criteria are all important.
Some welders are being required to test using 5/32" 7018 electrodes instead of smaller diameter electrodes like 1/8". 130 amps is at the... -
Stick Welding 4g 7018 plate Test - Ov...
This video covers stick welding a 4g Plate test using 7018 1/8" electrode 120-125 amps dcep.
Structural Welding Tests often require both 3G and 4G plates.
3/8" thick plates using 1/4" backing and 1/4" gap
22.5 degree bevel
