Jody Collier - Intro to MIG Course
.Only on WelderSkills.com: Jody Collier from WeldingTipsAndTricks is back again with a new course, "Intro to MIG Welding".
*NOTE*: This course, as well as every bit of our content and offers, are all available as part of our monthly membership subscription for only $12.99 a month. IF YOU'RE NOT A MEMBER, click here to become one!
If you're looking to get started with MIG GMAW welding and you'd like the internet's "Godfather of Welding" to guide you, you've come to the right place.
Getting started in a trade school or vocational program? Looking for a great supplement for welding school with affordable online courses? WelderSkills has you covered. Stay tuned for more and don't hesitate to contact us with questions or suggestions for future courses.
-
Part 1 - The Very Basics (MIG Basics with Jody Collier)
Start here if you'd like Jody Collier, of WeldingTipsAndTricks YouTube fame, to get you going.
Mig welding basics, machine settings, fundamentals; getting started with MIG welding.
-
Part 2 - Troubleshooting Early Problems (MIG Basics with Jody Collier)
Jody Collier from WeldingTipsAndTricks explains "the bird's nest".
Working with your machine to start getting better (less frustrating) results right out of the gate.
-
Part 3 - Tips on Technique (MIG Basics with Jody Collier)
Jody Collier from WeldingTipsAndTricks explains one of the best MIG gun techniques for beginners.
These technique tips will help you get better penetration (yes, that's a technical welding term), proven by testing.
-
Part 4 - Run Those Beads (MIG Basics with Jody Collier)
Now that Jody has you started, it's time to practice practice practice.
He'll explain some starting tips for voltage and wire feed settings, and will explain in a little more detail how to start refining your MIG welding technique.
-
Part 5 - Tee Joints (MIG Basics with Jody Collier)
One of the best ways to get a lot of practice with a small amount of metal is stacking beads on a tee joint.
Remember, "practice makes better" (because perfection doesn't exist).
-
Part 6 - MIG Vertical Uphill (MIG Basics with Jody Collier)
One of the most important concepts in welding is POSITION. Let's talk MIG welding, vertical uphill.
Mig welding vertical uphill requires using some manipulation to prevent the weld from being too convex. Proper settings (lower settings than what are normally used for flat and horizontal) techni...
-
Part 7 - Overhead MIG (MIG Basics with Jody Collier)
Mig welding overhead is mostly a matter of getting comfortable. Again, POSITION.
The same settings and techniques that are used for flat and horizontal also work on overhead. But if you typically weld really hot, reducing the wire speed by 10% might help.
-
Part 8 - The One Technique to Rule Them All (MIG Basics with Jody Collier)
If you're just looking to keep things simple, this one MIG technique works for all positions.
By tracing the front leading edge of the puddle, this one single MIG welding technique gets penetration in every position.
-
Part 9 - Short Arc MIG, Push vs Pull (MIG Basics with Jody Collier)
Using a push angle vs a pull angle is an argument that shouldn't even exist, but folks continue to argue. Both work.
For spray transfer MIG, pushing is usually best. But for short circuit MIG, both pushing and pulling have their place... and that's a good thing because sometimes you don't have ...
-
Part 10 - "MIG Like TIG" vs Hot (MIG Basics with Jody Collier)
In some industries, a certain look is expected for MIG welds. For example, the motorsports industries has adopted the "MIG like TIG" look.
It involves using settings different from what is normally used for production. Wire speed in particular is usually much lower, which lowers the overall trav...
-
Part 11 - MIG Welding 3F Uphill Tee (MIG Basics with Jody Collier)
MIG welding uphill requires lower settings. A pro tip is to just use the chart or auto settings for thinner metal ( 2 thicknesses usually works well).
-
Part 12 - MIG Welding Thin Wall Square Tubing (MIG Basics with Jody Collier)
MIG welding thin wall square tubing in a common fixed position.
-
Part 13 - MIG 11GA Square Tubing (MIG Basics with Jody Collier)
Weld sequence can help prevent distortion.
-
Part 14 - 3G MIG Plate Test (MIG Basics with Jody Collier)
The 3G plate test is sometimes used for MIG welding certification tests.
This video will be particularly helpful for a 3G certification test with uphill and downhill root passes.
-
WS-Short-Circuit-MIG-Cheat-Sheet.pdf
2.98 MB