-
JD Brewer - Job Shop
This video shows a quick, random but typical job to come in the shop. mild steel tubing and plate welded with .025 hardwire MIG.
-
Rocket Stove project
After watching at least 20 videos on making Rocket Stoves, I decided to try my own design. I scrounged up enough scrap materials laying around the shop to make one that works really well. I used A 10 inch piece of 3" stainless tubing
and a short piece of 1-1/4" sq tubing about 5 inches long w... -
JD Brewer - MIG Welding .060" Thin Tubing with .023 hardwire
This video shows how to weld thin gauge tubing with .023 hardwire.
-
Sam Hagan - Smokeless Firepit
Smokeless Fire Pit made out of a 55 Gallon Drum.
-
Matt Hayden - Custom Fire Pit Build
Matt shows us the A to Z of a custom fire pit project. Plenty of tips, instruction, and arc shots included.
-
Sam Hagan - Stump Grinder Reloaded
Repairing a stump grinder and fixing a bad design.
-
Sam Hagan - Truck Rear End Repair
Sam does a MIG repair on a leaking truck differential cover
-
Sam Hagan - Dirt Sifting "Rotato"
This is a machine that I dreamed up to sift dirt with a tractor or skidsteer.
-
Sam Hagan - Hydraulic Tank Repair
Repairing a rusted out hydraulic tank on a mobile crane. Process used: MIG and Plasma Cutter | Material: Carbon Steel
-
Sam Hagan - Aluminum Trailer Repair
Repairing an aluminum trailer with pulse MIG. Material Used: 4043 Aluminum | Process Used: Pulse MIG
-
Sam Hagan - Tractor Rim Repair
A look at a quick welding job on a tractor rim. This entire job took about 3 hours. Process used: MIG STICK | Materials used: Carbon Steel, 7018
-
Brother Moto Coffee Bar build with JD and Jimmy Diresta
Laser levels, cutting with a 6" Metabo, Tips for Mig welding off a 115 volt drop cord and a few fabrication techniques are shown during this project
-
Harbor Freight Hand Truck Welder Cart Project
My Friend JD designed and cut the parts to convert a Harbor Freight Hand Truck to a very functional welder cart for a lincoln power mig 210mp
-
JD Brewer - MIG Welding Downhill Roots and a Handrail Fitting
JD and Jody experiment with a used welding positioner bought off ebay.
JD had just finished up a handrail project and had a few fittings and some pipe left over. They tried some 6" schedule 80 as well as some 1-1/2" sched 40 pipe on the positioner.
Always learning...
-
JD Brewer - Firepit Build with PlasmaCam
1/4" thick tread plate that JD scored on a job site that was heading for the scrap yard. So he decided to build a fire pit for his helper Wyatt.
1/4" tread might be considered overkill for a fire pit but "there is no kill like overkill." Made for a fun day in the shop.