After watching at least 20 videos on making Rocket Stoves, I decided to try my own design. I scrounged up enough scrap materials laying around the shop to make one that works really well. I used A 10 inch piece of 3" stainless tubing
and a short piece of 1-1/4" sq tubing about 5 inches long with a 45% end.
I also used some 1/2" nuts and bolts in case I wanted to level it or use it on a picnic table top and not scorch the wood.
Or I could use a scrap piece of wood in between the rocket stove and my jeep bumper.
The difference between TIG brazing and TIG welding is brazing occurs above 840f but below the melting point of the base metal being joined.
Silicon bronze filler metal melts around 1800-1900f and carbon steel melts around 2800f.
Silicon bronze is a useful rod to have in your tig arsenal because i...
Super quick project but very useful is this slide hammer tool that uses a chisel and slide hammer for removing weld spatter
in this video you will see a quick little project... a pocket tungsten holder made with copper pipe.