TIG Weld the Aluminum Hurricane (Part 1)
Projects > TIG • 11m
This video shows the butt joint portion of this aluminum hurricane project and how a #5 alumina cup can be the best choice for certain aluminum welds
Up Next in Projects > TIG
-
TIG Welding Aluminum Hurricane (Part 2)
This project was sent to me by a laser cutting company that sells them as weldable kits. It was a good practice project that required a lot of different torch angles. Rotating the torch head as you weld is shown along with plenty of instructive arc shots
-
TIG Welding Aluminum Tote project
This is a large aluminum tote tray to hold several grinders and abrasive wheels
-
Aluminum Awning project TIG Welding i...
200 amps might seem like a lot but with the large heat sink due to the size of the project, 200 amps was actually about right for a lot of it. I used the foot pedal and for some of the welds, I backed off the amps quite a lot but for a few of the welds I was welding a 3/16" (5mm) thick doubler a...