TIG Welding Aluminum Hurricane (Part 2)
Projects > TIG • 9m 59s
This project was sent to me by a laser cutting company that sells them as weldable kits. It was a good practice project that required a lot of different torch angles. Rotating the torch head as you weld is shown along with plenty of instructive arc shots
Up Next in Projects > TIG
-
TIG Welding Aluminum Tote project
This is a large aluminum tote tray to hold several grinders and abrasive wheels
-
Aluminum Awning project TIG Welding i...
200 amps might seem like a lot but with the large heat sink due to the size of the project, 200 amps was actually about right for a lot of it. I used the foot pedal and for some of the welds, I backed off the amps quite a lot but for a few of the welds I was welding a 3/16" (5mm) thick doubler a...
-
TIG Welding Steel Cube Project
TIG welding cold rolled steel 3"x3" x1/4" using er309L and E70s-6 filler metal.
12 outside joints provides plenty of welds to experiment using different size filler metals and pulse settings too.
There is also a second video of filling in the corners using silicon bronze.
