TIG Welding Steel Cube Project
Projects > TIG • 4m 58s
TIG welding cold rolled steel 3"x3" x1/4" using er309L and E70s-6 filler metal.
12 outside joints provides plenty of welds to experiment using different size filler metals and pulse settings too.
There is also a second video of filling in the corners using silicon bronze.
Up Next in Projects > TIG
-
TIG Brazing a Steel Cube project
The difference between TIG brazing and TIG welding is brazing occurs above 840f but below the melting point of the base metal being joined.
Silicon bronze filler metal melts around 1800-1900f and carbon steel melts around 2800f.
Silicon bronze is a useful rod to have in your tig arsenal because i... -
Building a Slide Hammer Tool for Spat...
Super quick project but very useful is this slide hammer tool that uses a chisel and slide hammer for removing weld spatter
-
Making a Pocket Tungsten Holder from ...
in this video you will see a quick little project... a pocket tungsten holder made with copper pipe.