Live stream preview

Watch this video and more on WelderSkills

Watch this video and more on WelderSkills

TIG Welding Aluminum Lap joints on a Cube

TIG > Aluminum • 8m 27s

Up Next in TIG > Aluminum

  • TIG Welding Edge Beads Stainless, Car...

    Dimensional restoration is a big part of aerospace maintenance.
    A whole lot of aerospace tig welding is restoring worn metal.
    And that often involves being able to weld a very small bead on an edge.
    The thinner the metal, the more difficult it is so its good to start thick and work your way dow...

  • Roy Crumrine - TIG Welding Aluminum J...

    This is a collaboration video with Jody Collier and Roy "Crummy" Crumrine.

    Roy and Jody both do job shop work like this on the side and this aluminum welding job is very typical of the type of work we get. Often times, the machine shop will even make a fixture to help avoid mistakes and make the...

  • AC frequency settings for TIG Aluminum

    This is part 3 in a "how to tig weld aluminum" series. this video is about AC frequency adjustments and when to use different frequency settings.
    Rule of thumb here is higher frequencies seem to help on thinner aluminum and lower frequencies help on thicker aluminum...especially for tig welding...