Live stream preview

Watch this video and more on WelderSkills

Watch this video and more on WelderSkills

TIG Welding Aluminum Tote project

TIG > Aluminum • 6m 44s

Up Next in TIG > Aluminum

  • How to TIG Weld Aluminum - Part 1

    There is a lot to talk about.
    things like tungsten electrodes..type and size ( i like 2% lanthanated for everything and 3/32 takes care of most of my daily welding)
    shielding gases ...argon is best to start but if you begin to specialize in thicker aluminum, it might make sense to use a blend of ...

  • Aluminum Awning project TIG Welding i...

    200 amps might seem like a lot but with the large heat sink due to the size of the project, 200 amps was actually about right for a lot of it. I used the foot pedal and for some of the welds, I backed off the amps quite a lot but for a few of the welds I was welding a 3/16" (5mm) thick doubler a...

  • TIG Welding Aluminum with Different W...

    The current waveforms are advanced square wave, soft square wave, sine wave, and triangle wave.
    They all have slightly different looks, sounds and characteristics.
    Some waveforms are supposed to be better for thin metals, others for thicker metals.
    There is another advanced feature on a very few...