Jody Collier - High Speed Pulse Settings for Tig Welding on an Edge
TIG > Carbon Steel • 4m 5s
39 pps, 30% background current, and main amps set to 124 amps.
11 ga carbon steel
3/32" 2% lanth electrode
1/16" er70s6 wire
#8 cup 20cfh argon
Up Next in TIG > Carbon Steel
Roy Crumrine - Look Like This? Tig We...
Do you ever have your setup just right, machine settings perfect, gas flow rate right where the books say, arc gap is spot on, speed dialed in, and you still have a rough time with your welds coming out right? You might be missing one simple step....
2" Schedule 80 2G pipe Weld tips
This video shows the dip keyhole technique for a root pass on 2 inch sched 80 pipe. fill and cap passes also
Silicon Bronze TIG Brazing Tips
I first learned about tig brazing with silicon bronze while I was moonlighting at a sheet metal fab shop.
Owner brought me a hydraulic tube from the forklift that had sprung a leak and was worn paper thin and also handed me a piece of silicon bronze filler rod. I show a mockup of that repair in ...