TIG WELDING AWS D17.1 2G .063" STAINLESS STEEL PRACTICE TEST
TIG > Certification Tests • 4m 40s
This is A practice weld using 304L stainless steel in .063" thickness.
usually other alloys like 17-7ph, 15-7ph, are used for this test but the same techniques apply across the board
Up Next in TIG > Certification Tests
3G Stainless TIG Welding Practice for...
AWS D17.1 is the specification for aerospace fusion welding.
It is common for 1G tests to be done in aerospace welding certification because shops often have positions and manipulators that can pretty much get every weld in the flat position.
But sometimes employers require a 2G and or a 3G tes...
1G AEROSPACE PRACTICE TEST PLATE .038...
Video shows a 1G AEROSPACE PRACTICE TEST USING COLD ROLLED STEEL 038" at 48 AMPS.
Also compares using pulse settings to straight current.
If you are thinking about an aerospace welding job, edge beads are a great way to practice for a lot of the common tasks in aerospace tig welding.
And as far ...
3g .063" ALUMINUM D17.1 AEROSPACE TES...
AWS D17.1 specification is for Aerospace welding certification.
This is a 3g position using .063" 6061 aluminum.
Filing the sheared edge smooth and wipe with acetone prior to welding.