TIG Welding Aluminum Tips on a Fixture Plate
TIG > For Beginners • 10m
A laser cut aluminum star provides lots of different angles and opportunity to learn things like hand position
Up Next in TIG > For Beginners
-
AC Frequency Settings for TIG Welding...
This video is about tig welding aluminum on AC at 50hz and at 250hz.
there was a noticeable difference at the 2 different settings. 50hz got completed penetration and 250hz did not penetrate.
I tried to keep travel speed the same for both welds by using a motorized welding positioner turntable.
C... -
Pretty Welds are Not Always Good Welds
In this vdieo, I use a few different tig welding techniques to demonstrate that a pretty weld is not always a good weld. Filler rod size and technique are key factors.
-
TIG Welding Aluminum with Different W...
The current waveforms are advanced square wave, soft square wave, sine wave, and triangle wave.
They all have slightly different looks, sounds and characteristics.
Some waveforms are supposed to be better for thin metals, others for thicker metals.
There is another advanced feature on a very few...
