TIG WELDING AWS D17.1 2G .063" STAINLESS STEEL PRACTICE TEST
TIG > Stainless Steel • 4m 40s
This is A practice weld using 304L stainless steel in .063" thickness.
usually other alloys like 17-7ph, 15-7ph, are used for this test but the same techniques apply across the board
Up Next in TIG > Stainless Steel
-
Roy Crumrine - Purging Trick
Roy shows us how to use aluminum foil and painter's tape to purge some 310 stainless.
-
Tig Welding Restarts on Steel
Whether TIG welding, Mig Welding, Stick welding, or any other process, Restarts are part of the process. If you can make a decent restart, you are a lot less likely to have weld defects and a lot more likely to make a good looking weld.
What is the 3 second rule?
The 3 second rule says that it ... -
TIG Welding Stainless - Filling holes...
Stainless Steel needs either backing or argon shielding to the back side when the back side melts. Argon shielding usually gives the best quality but Copper or Aluminum backing can also work fine depending on engineering or code requirements
