WelderSkills - Stick Courses
6010 1/8" Stick welding overhead open root practice plate
This video uses a practice plate to demonstrate open root settings, techniques. also shown are hot pass, fill and cap. Arc shots, rod angle and more. Stick welding SMAW 6010 xx10
Up Next in 6010 Electrodes
STICK CARBON STEEL 6G 2 INCH SCHED80 ...
6G 6010 ROOT 332 ROD 2 INCH SCHED80 WS END.mov
WELD PROCESS = SMAW, SHIELDED METAL ARC WELDING, STICK WELDING
METAL TYPE = CARBON STEEL 2 INCH SCHED 80 PIPE
THICKNESS = 1/4” WALL THICKNESS
WELD TYPE = GROOVE
JOINT TYPE = BUTT
POSITION = 6G PIPE TEST uphill
AMPS = 65-70 AMPS
POLARITY = DCEP...
6010 Open Root Downhill Vertical Plat...
Pipe Welding downhill is required for many procedures in the oil and gas industry. It helps to start with plate and gradually move to pipe once you have the basics
Stick Welding with 5/32" 6010 Open Ro...
Stick Welding with practice plate open root that will get you ready for pipe.
This video shows importance of arc length and rod angle and well and lots of other great tips.
Stick Welding with 5/32" 6010 Open Root Plate Downhill