WelderSkills - Stick Courses
Stick Welding 6010 1/8" OPEN ROOT PLATE 7018 3/32" fill and cap UPHILL
5m 39s
Practice plate 3g plate 6010 root 7018 fill and cap
3/32" gap and 3/32" land
75-80 amps DCEP
these settings will work on pipe too
Up Next in 6010 Electrodes
-
STICK WELDING CARBON STEEL 6" SCHED 8...
6g 6 inch 6010 uphill root WS END.mov
WELD PROCESS = SMAW, SHIELDED METAL ARC WELDING, STICK WELDING
METAL TYPE = CARBON STEEL 6 INCH SCHED 80 PIPETHICKNESS = .430” WALL THICKNESS
WELD TYPE = GROOVE
JOINT TYPE = BUTT
POSITION = 6G PIPE TEST uphill
AMPS = 85 AMPS
POLARITY = DCEP
ELECTRODE...
-
STICK WELDING CARBON STEEL DOWNHILL O...
6010 1-8TH DOWNHILL ROOT PLATE WS END.mov
WELD PROCESS = SMAW, SHIELDED METAL ARC WELDING, STICK WELDING
METAL TYPE = CARBON STEELTHICKNESS = 3/8"
WELD TYPE = GROOVE WELD ROOT PASS 1/16 GAP, 1/16 LAND
JOINT TYPE = BUTT
POSITION = 3G DOWNHILL PLATE
AMPS = 90 AMPS
POLARITY = DCEP
ELECT...
-
6010 1/8" Stick welding overhead open...
This video uses a practice plate to demonstrate open root settings, techniques. also shown are hot pass, fill and cap. Arc shots, rod angle and more. Stick welding SMAW 6010 xx10
